Problem: Your plant loses $500K/year on inefficient hydrogen supply chains. Solution: Shijiazhuang Enric Gas Equipment delivers ASME/DOT-certified storage, compression, and purification systems with 30% faster lead times than competitors. OEM/ODM capabilities ensure custom designs for ammonia synthesis, refining, or fuel cells.
Industrial hydrogen buyers waste 20-40% of budgets on these avoidable issues:
Result: Our clients report 18% lower TCO within 12 months. See how →
Industrial hydrogen buyers must choose between:
• Cost: $1.50–$3.00/kg (MDPI 2024)
• Efficiency: 70-80% (SMR + CCUS)
• Carbon Intensity: 0.9-3.3 kg CO₂/kg H₂ (vs. 10-12kg for grey hydrogen)
• Best for: Refineries, ammonia production, steel (DRI)
• Cost: $3.00–$6.00/kg (target: <$2/kg by 2030)
• Efficiency: 60-80% (PEM/Alkaline)
• Carbon Footprint: Near-zero (when powered by solar/wind)
• Best for: Power-to-X, fuel cells, electronics (high-purity)
| Metric | Blue Hydrogen | Green Hydrogen |
|---|---|---|
| Global Share (2026) | 75% | 25% |
| CAPEX (2026) | $800–1,200/kW | $1,200–2,000/kW |
| Lead Time | 6–12 months | 12–24 months |
Source: IEA Global Hydrogen Review 2025
Shijiazhuang Enric’s ASME Section VIII Div.1 storage tanks (rated to 400 bar) with integrated leak detection.
Hydrogen Input: 1.5–2.0 kg H₂/ton NH₃
Key Requirements: Purity >99.9%, Pressure 150–300 bar
Our Solution: Custom PSA units with 99.999% purity and energy recovery systems cutting compressor power by 20%.
Hydrogen Use: 200–500 Nm³/ton crude
Challenges: Fouling in compressors, sulfur tolerance in membranes
Enric Advantage: Austenitic stainless steel vessels resist H₂S corrosion; remote monitoring via IoT.
Purity Spec: >99.97% (ISO 14687)
Storage: 350–700 bar Type IV cylinders
Case Study: Delivered 500kg/day hydrogen skid systems to EU fuel cell bus operators, reducing refueling time by 40%.
Critical Specs: 99.9999% purity, dew point <-70°C
Our Edge: Built-in particulate filters and real-time gas analyzers (H₂O, O₂, CO₂).
H₂ Demand: 55–65 kg/ton steel
Efficiency Tip: Pre-heat hydrogen to 400°C using waste heat recovery.
Hydrogen Purity: >99.5%
Challenge: Catalyst poisoning from CO₂ impurities
Solution: Our molecular sieve dryers remove CO₂ to <5 ppm.
Efficiency: 60-70% (round-trip)
Storage Media: Compressed H₂ (200 bar), Liquid H₂ (-253°C), or Ammonia (NH₃)
Enric’s Role: Boil-off recovery systems for liquid hydrogen storage.
Custom hydrogen purification skid with integrated molecular sieves and heat exchangers.
| Product | Key Specs | Certifications | Lead Time |
|---|---|---|---|
| ASME Storage Tanks | 350–400 bar, 50–500 m³ | ASME U, PED, DOT | 90 days |
| Hydrogen Compressors | Diaphragm/Piston, 10–450 bar | ATEX, IECEx | 120 days |
| PSA Purification Units | 99.9–99.999% purity | ISO 9001, CE | 150 days |
| Type IV Cylinders | 350–700 bar, 5–50L | DOT-3AA, ISO 11119 | 60 days |
inert-gas-bottle inline-packaging-leak-detector industrial-wastewater-tanks-manufacturer industrial-storage-silo
Yes. We manufacture ASME Section VIII Div.1 tanks rated to 500 bar with dual-layer fiberglass wrapping for seismic zones. Lead time: 90 days.
24 months on parts, 12 months on labor. Includes remote diagnostics via IoT sensors.
Yes. Our Type IV cylinders (350–700 bar) are DOT-3AA and ISO 11119 certified. Request DOT spec sheet →
Our PSA units achieve 99.9999% purity via:
30% deposit, 40% before shipment, 30% after commissioning. LCs accepted.
Absolutely. Our engineers perform 3D site surveys and provide turnkey integration. Example: Added H₂ purification to a BASF ammonia plant with zero downtime.
Fully compliant with IMDG Code (Class 2.1) and IATA DGR. Includes:
Yes. Our Johannesburg service center offers:
"The ASME tanks arrived 10 days early and passed our pressure tests with flying colors. Best supplier we’ve worked with in 10 years."
— Carlos Mendez, Plant Manager, Petrobras Brazil
"Their IoT-enabled compressors reduced our maintenance costs by 28%. The dashboard is a game-changer."
— Elena Petrov, Engineering Director, Gazprom Neft Russia
"We needed DOT-approved cylinders for a US Department of Defense project. Enric delivered on time and under budget."
— Rajiv Kumar, Procurement Head, Tata Steel India
Michael Chen is a Senior Process Engineer at Shijiazhuang Enric Gas Equipment with 22 years of experience in hydrogen storage, compression, and purification systems. Previously led R&D at Linde plc and holds a PhD in Chemical Engineering from Tsinghua University. Published 15+ papers on hydrogen safety and efficiency.
Expertise: ASME/ISO certification processes, CCUS integration, and industrial gas supply chains.
✅ ASME/DOT/CE Certified equipment
✅ 30% faster lead times than competitors
✅ 24/7 global support (USA/EU/Asia)
Limited-time offer: Free hydrogen purity test kit with all orders placed by Q1 2026.
📍 Global Contacts:
Europe: Bowen Di +86 15614368118 (WhatsApp)
North America: Jeremy Wu +86 15303302613 (WhatsApp)
China HQ: +86-311-81663811 | gasequipment@enricgroup.com
Shijiazhuang Enric Gas Equipment Co., Ltd.
No. 169, Yuxiang Street, Equipment Manufacture Base, Shijiazhuang, 051430 Hebei Province, China
https://www.enricgroupsjz.com/contactus/
© 2026 Shijiazhuang Enric Gas Equipment. All rights reserved. | Privacy Policy | Terms of Service
-Hengkai Natural Gas Liquefaction Project
-Changming Phase II Natural Gas Liquefaction Project
-Hwange Natural Gas Liquefaction Project
-Tianhao Coalbed Methane Liquefaction Project
-Tianyun Coalbed Methane Liquefaction Project
-Shuntai Coalbed Methane Liquefaction Project
-60.000 cubic meters/day
-60.000 cubic meters/day
-60.000 m3/day*2 sets
-200.000 cubic meters/day
🏆 Trusted by 40+ Countries: Global Certifications & Client Logos
✅ Certifications (Global Compliance)
🌍 Client Testimonials
"Enric’s compressors cut our hydrogen refueling time from 45 to 28 minutes. ROI in 14 months."
— Johan De Vries, Operations Manager, Nouryon Netherlands
"The PSA unit’s 99.999% purity exceeded our semiconductor specs. Zero complaints in 2 years."
— Li Wei, Technical Director, SMIC China
"Their DOT-approved cylinders passed our rigorous drop tests. Critical for our forklift fleet."
— Anna Müller, Supply Chain Lead, BMW Group