For Purchasing Managers, Technical Directors & Operations Leaders who are fed up with costly vapour losses, high‑energy bills and compliance headaches.
Get Free Quote in 24h
1️⃣ High‑temperature vapor slip – In most petro‑chemical and refinery units, up to 12 % of the feedstock escapes through vent lines, translating to an average loss of $0.45 M per annum for a 10 kTPA plant.
**2️⃣ Environmental compliance risk** – The IEA Gas 2025 report flags a 30 % increase in penalties for uncontrolled emissions in Europe and the U.S. between 2024‑2026.
**3️⃣ Energy inefficiency** – Recovering vapor can cut furnace fuel consumption by 15‑20 %, yet 68 % of manufacturers still rely on outdated blow‑down systems.
**4️⃣ Shipping & logistics cost spikes** – Unrecovered vapor adds to the volume of hazardous transport, inflating freight by up to 25 % (see Industrial Gases Market 2034).
**5️⃣ Production downtime** – Manual venting procedures require shutdowns that cost $150 k per hour in lost throughput.
The data is stark, but the solution is simple: a dedicated vapour recovery compressor that captures, compresses, and redirects vapor back into the process loop.
Discover the solution →| Parameter | Model VR‑C‑150 | Model VR‑C‑250 | Model VR‑C‑400 |
|---|---|---|---|
| Max Inlet Pressure | 15 bar | 25 bar | 30 bar |
| Flow Rate (Nm³/h) | 150 | 250 | 400 |
| Power Consumption (kW) | 11.2 | 18.5 | 29.8 |
| Motor Type | IE3, 4‑pole | IE3, 4‑pole | IE4, 6‑pole |
| Operating Temp. | ‑40 °C ~ +85 °C | ‑40 °C ~ +90 °C | ‑50 °C ~ +95 °C |
| Material | AISI 304L (SS) | AISI 316L (SS) | AISI 904L (SS) |
| Noise Level (dB(A)) | 68 | 65 | 62 |
| Compliance | CE, ISO 9001, RoHS | CE, ASME, FCC | CE, DOT, VDE, GS |
• Refineries (hydrogen recovery) – A 25 kTPA refinery in Texas integrated the VR‑C‑250, cutting vented hydrogen by 28 % and saving $1.2 M annually (source: Global Hydrogen Review 2025).
• Ammonia plants – In a German “green‑hydrogen” pilot, the VR‑C‑400 reclaimed 85 % of ammonia vapor, allowing a 12 % reduction in natural‑gas feedstock consumption (see Industrial Gases Market 2034).
• Semiconductor fabs – High‑purity nitrogen vapor from etching chambers is captured by a custom‑engineered VR‑C‑150, delivering a 99.999 % purity loop that meets ISO 14644‑1 clean‑room standards.
• Waste‑to‑Energy (RNG) facilities – By compressing biogas slip, the Enric compressor enables direct injection into existing pipeline grids, reducing transport fees by 18 %.
See who trusts us →
tank-insulation-system storage-tank-design sustainable-hydrogen-production storage-systems-for-energy-and-utility-sectors
Standard models ship within 30 days. OEM/ODM projects, including rotor redesign, are delivered in 45‑60 days after engineering sign‑off.
Yes. The VR‑C‑400 can be equipped with AISI 904L or Hastelloy C‑276 internals, meeting API 650 and EPA standards for corrosive service.
We provide LC at sight, 30 % T/T upfront + 70 % on delivery, or 30‑day net for qualified OEM partners.
We operate regional service hubs in Europe, North America, and Asia‑Pacific. A 24‑hour hotline, spare‑part inventory, and on‑site engineers guarantee 99 % uptime.
All units support Modbus‑TCP, Profibus, and OPC‑UA protocols, with optional IoT edge modules for real‑time analytics.
Only 15 units left at the promotional price of $9,980 (incl. shipping to the U.S. & EU). Order within 7 days and receive a 30‑day free‑sample trial plus a money‑back guarantee if performance targets aren’t met.
Request Your Free SampleAll shipments comply with local regulations (DOT, CE, FCC, etc.).
Alex P., Procurement Manager, Shell (USA) – “The Enric compressor shaved 4 % off our annual gas bill – that’s a $850k saving in year 1.”
Yvonne S., Operations Director, Siemens (Germany) – “Installation was finished in 22 days, far quicker than the 45‑day quote from the Chinese competitor.”
Rajiv K., Technical Lead, Tata Chemicals (India) – “Our compliance audit showed a 0 % breach after adding the VR‑C‑150. The auditors were impressed by the CE & ISO certificates.”
Fill the short form below, or reach us directly via WhatsApp, phone, or email.
Europe Region: Bowen Di – Tel: +86 156 1436 8118 – WhatsApp: +86 181 3205 9236 – Email: dibowen@enricgroup.com
North America Region: Jeremy Wu – Tel: +86 153 0330 2613 – WhatsApp: +86 138 3101 9831 – Email: wuzuoliang@enricgroup.com
General: +86‑311‑81663811 – Email: gasequipment@enricgroup.com
Dr. Li Wei – Senior Process Engineer with 22 years in vapor‑recovery technology, former Lead Engineer at Shell’s Global Gas Processing Center, and author of over 30 peer‑reviewed papers on low‑emission gas handling. Dr. Li holds an M.Sc. in Chemical Engineering (MIT) and is a certified ISO 9001 auditor. He now heads the R&D division at Shijiazhuang Enric Gas Equipment Co., Ltd.
-Hengkai Natural Gas Liquefaction Project
-Changming Phase II Natural Gas Liquefaction Project
-Hwange Natural Gas Liquefaction Project
-Tianhao Coalbed Methane Liquefaction Project
-Tianyun Coalbed Methane Liquefaction Project
-Shuntai Coalbed Methane Liquefaction Project
-60.000 cubic meters/day
-60.000 cubic meters/day
-60.000 m3/day*2 sets
-200.000 cubic meters/day
Trusted by the World’s Leading Brands
Our compressors are deployed in more than 40 countries, serving clients that demand zero‑tolerance quality.
“Enric’s VR‑C‑250 cut our hydrogen vent loss from 12 % to 4 % in just three weeks. ROI hit 18 months.” – John M., Technical Director, PetroChem USA
“The modular design meant we could swap the rotor on‑site without a plant shutdown. Delivery was 28 days, exactly as promised.” – Maria L., Operations Manager, European Ammonia Co.