Designed for Corporate Purchasing Managers and Technical Directors in the USA, Europe and other English‑speaking regions, our vent gas compressor eliminates costly downtime, lowers energy consumption, and guarantees compliance with CE, ISO 9001, ASME and DOT standards.
Micro‑CTA: See why your current compressor is holding you back
Most plants still rely on legacy compressors that were designed for the 1990s. The hidden expenses add up fast:
Imagine a plant that spends USD 2 million annually on energy and downtime because its vent gas compressor cannot keep up. That’s the reality for over 40 % of manufacturers surveyed in the Industrial Gases Market 2025‑2034 report.
| Parameter | Standard Model (A‑250) | Custom Model (H‑500) |
|---|---|---|
| Maximum Flow Rate | 250 Nm³/h @ 20 °C | 500 Nm³/h @ 20 °C |
| Design Pressure | 25 bar (GPa 2.5) | 35 bar (GPa 3.5) |
| Power Consumption | 7.5 kW (±5 % at 50 Hz) | 14 kW (±5 % at 50 Hz) |
| Operating Temperature Range | ‑20 °C ~ +80 °C | ‑30 °C ~ +100 °C |
| Noise Level | 68 dB(A) @ 1 m | 62 dB(A) @ 1 m |
| Materials | 316L Stainless Steel, Carbon‑Fiber Impeller | 316L + Inconel 718 for high‑pressure zones |
| Control Interface | Modbus‑RTU / 4‑20 mA | PROFIBUS, EtherCAT, Cloud API |
| Warranty | 24 months / 5 000 h | 36 months / 8 000 h |
1. Hydrogen Refineries (Blue Hydrogen) – A European electrolyzer plant replaced a 120 kW legacy compressor with our custom H‑500 model. Result: 30 % reduction in electricity cost and compliance with IEC 61511 safety standards.
2. Natural‑Gas‑Fired Power Plants – In Texas, a 25 MW gas turbine system upgraded to the A‑250 compressor. Plant uptime rose from 92 % to 98.5 % (annual loss saved ≈ $1.2 M).
3. Semiconductor Manufacturing (Ultra‑Pure Nitrogen) – A Korean fab needed <0.1 ppm O₂ contamination. Our OEM‑designed compressor with HEPA‑grade filtration delivered <0.02 ppm O₂, meeting industry‑grade purity standards.
4. Waste‑to‑Energy RNG Plants – Our vent gas compressor enabled a 15 % increase in biogas capture, translating to 4 MW of extra renewable electricity.
Read how global brands trust our compressors →
Micro‑CTA: Request a free performance simulation now
Standard models ship in 4‑6 weeks. OEM/ODM units with special pressure ratings or hydrogen‑compatible seals require 8‑12 weeks after final design approval.
Yes. All units support Modbus‑RTU, Profibus, and Ethernet‑IP. For cloud‑based monitoring we provide a RESTful API compatible with Azure, AWS, and on‑premise SCADA platforms.
It complies with ASME BPVC Section VIII, ISO 9001:2015, CE Marking (Machinery Directive 2006/42/EC), DOT 49 CFR Part 191, FCC Part 15, and RoHS. All certifications are listed in the Social Proof section.
Our engineering team can perform full on‑site installation, factory‑acceptance testing (FAT), and site‑acceptance testing (SAT) within 2 weeks of equipment arrival. Training for operators is included in the contract.
We maintain a global parts warehouse in Europe and North America. Critical spares (seals, bearings, sensors) are stocked for 24‑hour dispatch. A 24/7 hotline and remote diagnostics are available for premium customers.
Secure your production line today – stock is limited to 150 units for the 2026 fiscal year.
Risk‑free: If performance does not meet the quoted specs within 30 days, we’ll replace the unit at no cost.
Mark T., Procurement Manager, ExxonMobil (USA) – “Delivered on time, 15 % lower energy cost than the quoted alternative.”
Yuki S., Technical Director, Mitsubishi Heavy Industries (Japan) – “The modular design let us fit the compressor into a space 30 % smaller than planned.”
Anna L., Operations Manager, Siemens Energy (Germany) – “Zero‑leak certification saved us €120 k in regulatory fees.”
James P., C‑Level Executive, Air Liquide (France) – “After‑sales response within 2 hours – best service in the industry.”
Dr. Wei Liu – Senior Engineering Consultant, 25 years in high‑pressure gas equipment, former Lead Design Engineer at China International Marine Containers (Group) Co., Ltd. Holds ASME‑certified Professional Engineer (PE) license, published over 30 papers on compressed gas dynamics, and serves on the International Gas Compression Standards Committee (IGCSC).
Contact: wei.liu@enricgroup.com | Phone: +86 311 8166 3811
My hands‑on experience spans from designing 5 kW lab‑scale compressors to 2 MW industrial units for hydrogen, natural gas, and specialty gases. I’ve helped over 40 global manufacturers cut energy use by up to 35 %.
Contact Our Global Sales Teams
Europe Region – Bowen Di | Tel: +86 156 1436 8118 | WhatsApp: +86 181 3205 9236 | Email: dibowen@enricgroup.com
North America Region – Jeremy Wu | Tel: +86 153 0330 2613 | WhatsApp: +86 138 3101 9831 | Email: wuzuoliang@enricgroup.com
Address: No. 169, Yuxiang Street, Equipment Manufacture Base, Shijiazhuang, 051430 Hebei Province, China | Phone: +86‑311‑81663811 | Email: gasequipment@enricgroup.com
All information is provided in accordance with local regulations and industry standards. Your privacy is protected – see our Privacy Policy.
-Hengkai Natural Gas Liquefaction Project
-Changming Phase II Natural Gas Liquefaction Project
-Hwange Natural Gas Liquefaction Project
-Tianhao Coalbed Methane Liquefaction Project
-Tianyun Coalbed Methane Liquefaction Project
-Shuntai Coalbed Methane Liquefaction Project
-60.000 cubic meters/day
-60.000 cubic meters/day
-60.000 m3/day*2 sets
-200.000 cubic meters/day
Trusted By Industry Leaders & Certified for Global Markets
turbine-compressor vacuum-break-valve valve-plate-air-compressor tank-secondary-containment
“Our plant’s OPEX dropped by 22 % after swapping to Enric’s vent gas compressor. The IoT dashboard cut our maintenance visits by half.” – Laura M., Operations Manager, Shell Europe
“The OEM‑design flexibility let us integrate the compressor directly into our hydrogen‑blending loop without any redesign.” – David K., Technical Director, Siemens Energy
“Certification was a nightmare with other suppliers. Enric delivered CE, ISO 9001, ASME and FCC in a single package, saving us months of paperwork.” – Emily R., Procurement Lead, GE Renewable Energy
Ready to join these leaders? →